What Is the 1Pole Tent Tarp Connector and How Do You Use It?
By DOD Outdoors - Quality Japanese Camping Gear since 1997 | Published: 2026-10-26
Category: How-to Guides
The 1Pole Tent Tarp Connector joins a pyramid or 1Pole tent with a tarp to create an extended living area. This guide explains its purpose, setup steps, and practical tips.
Quick answer
The 1Pole Tent Tarp Connector is a reinforced polycotton cap that links a compatible pyramid or 1Pole tent to a tarp, giving you a dry, covered living space next to your shelter.
Why use a connector instead of just a tarp?
A standalone tarp leaves a gap between your tent and the covered area, letting rain drip in and wind blow through. The connector bridges that gap with a sealed, adjustable link. It also saves you from having to pitch a separate tarp pole, since the tent's single pole supports both structures.
Which tents work with this connector?
The connector is designed specifically for DOD Outdoors' RX Pyramid Tents and Ichi 1Pole Tents. If you own a different brand or a multi-pole tent, the fit and stability are not guaranteed. Always check the tent's pole diameter and peak shape before buying.
Can I use any tarp with the connector?
The connector is built to support substantial tarps, thanks to its PVC-reinforced polycotton fabric. However, an extremely large or heavy tarp may still strain the connection. For best results, pair it with a tarp that is roughly the same size as your tent's footprint or slightly larger.
Frequently asked questions
- How do I attach the connector to the tent?
- Place the 1Pole Cap over the peak of your RX Pyramid or Ichi 1Pole Tent after the tent is fully pitched. The cap should sit snugly over the pole tip. Secure it with the included rope and carabiner, adjusting the tension so the cap doesn't slip.
- How do I connect the tarp?
- Drape your tarp over the connector cap, centering it so the cap supports the tarp's peak. Use the connector's carabiner to clip the tarp's center grommet or loop to the cap. Then stake out the tarp's corners as you normally would. Make sure the tarp's center is aligned with the cap before staking, or the fabric may sag unevenly.
- How do I adjust the setup for different conditions?
- The rope and carabiner let you change the height and angle of the tarp relative to the tent. For rain, lower the tarp edge on the windward side. For ventilation, raise the tarp slightly on one side. Always check that the connector remains centered and the tent pole stays upright. Re-tension the rope if wind picks up to prevent the cap from shifting.
- Do I need additional poles?
- No. The connector uses your tent's existing single pole as the support for both the tent and the tarp. This keeps your pack light and setup fast.
- How do I store the connector?
- Clean off any dirt or moisture after each trip, then store it in a dry place. The polycotton fabric is durable but can mildew if packed wet. Roll rather than fold to avoid creases in the PVC layer.
Product facts
- 1Pole Tent Tarp Connector: Made from reinforced polycotton fabric embedded with PVC to support substantial tarps. Includes a rope and carabiner for easy adjustment. The reinforced fabric and included hardware let you set up a stable, gap-free extension without extra gear.
1Pole Tent Tarp Connector
